Peloton Bike+ PL02 and the Original Bike PL01 are recalled for seat post failures; both get a free replacement seat post from Peloton.
The short answer many owners want right away: the recalled Peloton bikes are the Original Bike (model PL01) and the Original Series Bike+ (model PL02). The issue in both cases is a seat post assembly that can crack or break under load. The remedy is a redesigned seat post that Peloton provides at no cost. Below you’ll find exactly which units are covered, how to check your model and serial, and the fastest path to your repair.
Which Peloton Bike Is Recalled? Full List And Dates
Two Peloton bicycles carry formal recalls tied to the seat post. The Original Bike (PL01) recall began in May 2023 across units sold from January 2018 through May 2023. The Original Series Bike+ (PL02) recall was announced on November 6, 2025, with coverage spanning units sold between 2020 and April 2025. Both actions direct owners to stop riding until a free replacement post is installed. If you searched “which peloton bike is recalled?” for clarity, the table below maps the models, time windows, and the immediate action to take.
Peloton Recall Snapshot: Models, Window, What To Do
| Model / Identifier | Sales Window Covered | Owner Action |
|---|---|---|
| Original Bike (PL01) | Jan 2018–May 2023 (U.S.) | Request free seat post; stop riding until installed. |
| Original Bike (PL01) | Jan 2018–May 2023 (Canada) | Request free seat post; stop riding until installed. |
| Original Series Bike+ (PL02) | 2020–Apr 2025 (U.S.) | Request free seat post; stop riding until installed. |
| Original Series Bike+ (PL02) | 2020–Apr 2025 (Canada) | Request free seat post; stop riding until installed. |
| Bike+ Units Built Mid-2023 Onward | Not in scope if factory-fit with redesigned post | No action unless your serial falls in the recall batch. |
| Tread+ (TR01) | Separate treadmill recall (2021) | See official treadmill guidance; not a bike recall. |
| Tread (TR02) | Separate treadmill recall (2021) | See official treadmill guidance; not a bike recall. |
How The Peloton Bike Recalls Work
Both recalls center on the same failure mode: the seat post assembly can fracture during use. That break can drop the rider suddenly. The U.S. safety regulator documented injury reports that include wrist fractures, cuts, and bruises. The remedy is straightforward: Peloton ships a redesigned seat post that owners can fit at home using hand tools. The repair keeps your existing bike frame and electronics in place.
For the Original Bike (PL01), the 2023 action covered about two million units sold over five years in the U.S., with a similar program in Canada. For the Bike+ Original Series (PL02), the November 2025 action covers around 833,000 bikes in the U.S., with tens of thousands more in Canada. If you ride daily, treat this as urgent. The fix is quick once the part is in your hands.
Which Peloton Bike Is Recalled? Identification Steps
To confirm whether your bicycle is part of the recall, you’ll verify two things: the model ID and your serial. Both are stamped on the bike and shown inside your account. If you’re unsure where to look, the steps below will help you find what you need in a minute or two.
Find Your Model And Serial In Minutes
- Power down and stabilize the bike on a level floor.
- Check the inner fork area and near the flywheel shroud for a printed label showing the model (PL01 or PL02) and serial starting character.
- Open your Peloton account and cross-check the model listed there with what’s on the frame label.
- If your label shows PL01, your unit is the Original Bike. If it shows PL02, it’s an Original Series Bike+.
- Compare your serial to the recall guidance; many Bike+ serials in scope start with “T.”
- If you match a recalled cohort, stop riding and request the kit right away.
What Each Owner Should Do Next
Owners of affected units should request the free seat post and wait to ride until the kit is installed. The process is simple: confirm model and serial, submit the request, receive the redesigned post, then swap the part. Most riders can complete the install in a short session. If you’d prefer a pro visit, contact Peloton support to ask about service options in your area.
Install Basics For The New Seat Post
The replacement arrives as a complete post assembly. Keep the original hardware handy, protect the frame from scratches with a towel during the swap, and torque fasteners to spec. After installation, check saddle height, fore-aft, and tilt, then ride gently for a short shakedown and re-check tightness. If anything creaks, pause and re-seat the clamp before continuing.
Safety Context And Official Notices
Regulators published detailed recall notices with the known incident counts, remedy, and contact paths. If you want the formal language or need to share documentation with a household member, see the CPSC 2023 bike recall for the Original Bike (PL01) and the CPSC 2025 Bike+ recall for the Original Series Bike+ (PL02). Both pages include photos and fix details.
Symptoms Your Seat Post May Be Failing
Even if your serial is covered, the bike might feel fine until the instant it isn’t. That’s why the recall asks you to stop riding and install the new post first. That said, these warning signs should prompt immediate downtime:
- Audible cracking or sharp pops from the seat area during seated efforts.
- Visible hairline splits along the post surface or near the clamp zone.
- Sudden saddle drop at a set height, even when the clamp feels snug.
- Any movement you can reproduce by hand at the interface.
Do not try to “baby” the bike through workouts if you notice these. Store it, request the kit, and wait for the redesigned component.
What If My Peloton Isn’t Listed?
If your model is outside the listed windows or shows a later factory post, you can keep riding. Still, it pays to keep an eye on clamp tension and wear where the post meets the frame. Check your bike as part of normal maintenance: tighten to spec, wipe the post clean, and avoid over-lubing the clamp surfaces. If your serial sits near the boundary, reach out to support and verify coverage by number rather than guesswork.
Where To Find Model And Serial On The Bike
| Part | Where To Look | What You’ll See |
|---|---|---|
| Model Label | Inside or behind the front fork, near flywheel | “PL01” (Original Bike) or “PL02” (Original Series Bike+) |
| Serial Sticker | Same label panel; also in account details | Alphanumeric string; Bike+ units in scope often start with “T” |
| Seat Post Clamp | At top of seat tube | Check for smooth movement and no visible cracking |
| Seat Post Body | Exposed post between saddle and frame | Look for splits, chips, or pinch marks |
| Torque Reference | User guide or sticker near clamp | Nm values; tighten evenly and re-check after first ride |
| Account Screen | Settings → Device info | Confirms model and serial for recall lookup |
Timelines, Units, And What They Mean For You
For the Original Bike recall in 2023, the regulator cited about two million units across a five-year sales span. For the Bike+ recall in 2025, the notice lists about 833,000 U.S. units and a parallel action in Canada. These figures don’t change your remedy, but they help explain why support lines may be busy near announcement dates. If you submitted a request and haven’t received tracking, check your email and account dashboard, then follow up through the designated recall contact.
What About The Tread Recalls I’ve Heard About?
Peloton treadmills had separate recalls in 2021, one related to entrapment risk on the Tread+ and another for a touchscreen issue on the smaller Tread. Those actions sit apart from the bicycle seat post issue. If you also own a treadmill, review the official treadmill notices and follow the listed remedies. The bike recall steps in this article won’t resolve treadmill items.
Care After The Fix
Once the new post is installed, keep the clamping area clean and dry. Wipe sweat after workouts, keep the collar free of grit, and check fasteners every few weeks. If the saddle height drifts under load, re-set the post and re-tighten. Seat height marks help you return to your fit quickly if you remove the post for cleaning. If any part looks damaged later, stop riding and contact support again with photos.
How To Talk To Household Riders
Many bikes serve multiple riders. Until the new post is in place, put a note on the bars and unplug the bike. Share the model and serial with everyone who rides at home, and show them the recall page you used to request the part. That avoids accidental rides during the wait and cuts the risk of a mid-workout failure.
Why The Same Fault Appears Twice
The Original Bike and Bike+ are different platforms, yet they share a stress point at the seat post. Heavy seated intervals put large bending loads into that component. Small material or geometry changes can shift how that load spreads, which is why a new design resolves the issue. The redesigned post addresses the weak zone while keeping the rest of the bike unchanged.
What This Means If You’re Shopping Used
Plenty of used Peloton bikes trade locally. If you’re buying second-hand, bring the recall notes to the meetup. Verify the model and serial, then confirm the presence of the redesigned post. If the seller never requested one, insist that the request is placed and the part arrives before you exchange cash. It’s a quick step that protects you and the rider who comes after you.
Bottom Line For Owners
If you own an Original Bike (PL01) or an Original Series Bike+ (PL02), your bike is likely covered. Don’t wait for a problem to appear. Submit the request now, install the redesigned post, and get back to normal training with a safer setup.
Sources And Verification
Regulator notices and company guidance confirm the dates, models, and remedies cited here. The Original Bike action appears in the U.S. safety notice for 2023, while the Original Series Bike+ action appears in the November 2025 notice. Canadian notices mirror the same model IDs with local counts. If your bike sits at the edge of those ranges, verify by serial with support before riding.
Quick Reminders
- Recalled models: PL01 and PL02.
- Remedy: free seat post kit.
- Action: stop riding until the new post is installed.
FAQ-Free Wrap-Up You Can Act On
You now know which Peloton bike is recalled, how to verify your unit, and the exact remedy. If your label shows PL01 or PL02 within the listed windows, request the part and pause your rides until it’s fitted. Keep this page bookmarked, share it with anyone who rides your bike, and set a reminder to check clamp torque after your first workout on the new post. Safe miles start with that one fix.