The model number on a Peloton bike sits on a small label inside the front fork near the flywheel, with backups on the frame and in touchscreen settings.
If you are typing “where to find the model number on a peloton bike?” into a search bar, you are probably dealing with a warranty form, a recall check, or a parts order. The good news is that Peloton placed the model code in predictable spots, so with a little light and a slow scan of the frame, you can track it down without guesswork.
This guide walks you through every common label location on the Peloton Bike and Bike+, how the model code looks on the sticker, and what to do when the label is faded or hard to read. By the end, you will know exactly where to crouch, which side to check, and how to confirm the model through your touchscreen.
Why You Need Your Peloton Bike Model Number
The model number is a short code such as PL01 or PL02 that tells Peloton which hardware you own. It sits alongside the serial number but works differently. Where the serial is unique to your bike, the model code groups you with others that share the same frame and parts.
You will usually be asked for the model number when:
- Filling out a warranty or repair request form.
- Checking whether your bike falls under a recall or service campaign.
- Ordering a seat post, crank, or other hardware that depends on the exact frame version.
- Listing a used Peloton for sale and buyers want to know whether it is a Bike or Bike+.
- Matching your bike to accessories such as trays, cages, or covers that fit only certain frames.
Because Peloton has run hardware recalls tied to specific model codes, such as the Original Series Bike+ PL02 units listed by the U.S. Consumer Product Safety Commission, knowing your model helps you check safety notices quickly and avoid guessing from photos alone.
Where To Find The Model Number On A Peloton Bike? Quick Visual Guide
On both the original Peloton Bike and the Bike+, the model code lives on a small printed sticker on the frame near the front of the bike. In many cases you will see it inside the front fork by the flywheel; some bikes also carry a label behind the fork or under the frame near the front stabilizer.
Before you start, power the bike down, unplug it, and clear a bit of space around the front wheel. A small flashlight or the torch on your phone makes this job far easier, especially if the sticker sits low near the floor.
Peloton Bike Model Number Locations At A Glance
| Location On Bike | Which Bikes It Usually Applies To | How To Spot The Label |
|---|---|---|
| Inside front fork facing the flywheel | Most Peloton Bike and Bike+ units | Small white or black sticker inside the fork leg; shine a light through the gap toward the flywheel. |
| Behind front fork near the flywheel | Peloton Bike+ Original Series PL02 | Sticker tucked behind the fork; kneel at the front and angle the light upward along the fork. |
| Under the frame near front stabilizer | Some original Bike frames and refurbished units | Sticker on the underside of the main frame tube near the stabilizer bolts, close to the floor. |
| Underside of frame near crank area | Selected bikes built by partner factories | Label near the bottom bracket shell; tilt the bike slightly and check under the central frame section. |
| Rear frame near the seat tube base | Occasional later-production frames | Narrow sticker on the rear triangle, low and close to the crank on the non-drive side. |
| Touchscreen hardware menu | Peloton Bike+ and newer touchscreens | From the home screen open device settings, then the “About” or “Status” screen to see model details. |
| Original order paperwork or invoice email | Any Peloton Bike purchase | Model code listed near the product name in the order summary or PDF receipt. |
| Online account history summary | Bikes linked to a Peloton account | Device details shown when you check the serial in your Peloton history and warranty summary tools. |
Once you know these spots, the question where to find the model number on a peloton bike? turns into a simple checklist. Start with the front fork, then work your way under the frame, and finish with documents and digital menus.
Step-By-Step Frame Check For The Model Label
Think of the frame check as a slow walk around the front half of the bike. You do not need special tools, but you should keep the bike stable and avoid pulling on the flywheel or crank arms.
Step 1: Power Down And Clear Space
Hold the power button until the touchscreen shuts off, then unplug the bike from the wall. Move any mats, dumbbells, or shoes that sit near the front stabilizer so you have room to kneel and move your light around the wheel.
Step 2: Scan Inside The Front Fork
Kneel in front of the bike and shine your light through the opening in the fork legs toward the flywheel. You are hunting for a small rectangular sticker with printed text that includes “PL01” or “PL02” along with other characters. The code might sit on the inside of either fork leg or on a plate near the flywheel.
If your bike leans against a wall, roll it a little away so your head and light can slip between the wall and the front wheel. Keep one hand on the bars or the stabilizer so the bike does not shift while you lean in.
Step 3: Check Behind The Fork And Around The Flywheel
If the inside-fork scan comes up blank, shift to the side of the bike. From the rider’s left side, aim the light behind the fork blades and along the flywheel guard. Some Bike+ units carry the sticker in that pocket, protected from sweat and shoes.
Move the flywheel a little by hand until the light can reach the back of the fork. You should not need to spin it fast; a slow turn is enough to expose hidden corners where Peloton may have placed the label.
Step 4: Inspect Under The Frame Near The Front Stabilizer
Still on the left side, crouch down until your eyes are level with the floor. Aim the light under the main frame tube, near the bolts that join the frame to the front stabilizer. Many bikes carry serial and model codes here, printed on a sticker that faces the floor.
If your bike sits on a thick mat, you might need to slide the mat a little so you can see the underside of the frame. Never lift the bike by the flywheel or crank arms; use the stabilizers or ask another person to help tilt the frame a few degrees if needed.
Step 5: Sweep The Rear Triangle
As a final frame check, sweep your light along the rear triangle near the seat tube base and the crank area. Some later production runs place hardware labels low on the rear section where shoes and sweat are less likely to hit.
Wipe dusty spots with a dry cloth before you read any code. Dust and chalky sweat can blur thin printing, and a quick wipe often brings faded letters back into view.
Finding The Peloton Bike Model Number On Different Versions
Peloton has released several hardware versions that still fall under the simple names “Bike” and “Bike+.” The frame shape stays familiar, but the label layout can shift a little between runs or factories. That is why you may see guidance that lists more than one possible spot on the same model.
Peloton’s own hardware serial-number guide explains that both the model and serial codes live directly on the equipment, with the label position varying by device and series. You can see this in their diagrams for the Bike and Bike+, which highlight the fork and base areas as primary label positions and show the menu route for reading hardware details through the touchscreen.
Safety notices from the U.S. Consumer Product Safety Commission tell a similar story. When describing the Original Series Bike+ recall, the agency points owners to a PL02 model code printed on a label inside the front fork, behind the front fork, or behind the flywheel. That confirms that you are searching in the right neighbourhood when you scan the front end of the frame.
In day-to-day life, you do not need to stress about minor layout changes. If you follow the fork, base, and crank checks above, you sweep all practical spots. The model code will appear as a short text string on the label alongside the longer serial number, and both are worth photographing once you find them.
Using The Touchscreen To Confirm Your Model Number
On many Bike+ units, you can confirm the model code without crawling on the floor at all. The tablet stores hardware details in a simple settings menu, which makes a handy backup when the frame sticker is worn or hard to reach.
Steps On The Peloton Touchscreen
- Turn the bike on and wait for the main home screen to load.
- Tap the three dots or menu icon in the lower corner of the screen.
- Open the device or tablet settings menu.
- Tap the “About” or “Status” section that lists hardware details.
- Look for entries that show the bike model, hardware version, or similar wording.
On some tablets, you may only see a hardware revision or tablet code, while others show the bike model as well. If the bike menu does not show a clear PL01 or PL02 entry, combine what you see there with the frame sticker so you can note both values in your records.
To see how Peloton lays out these menus and labels, you can check the
Peloton hardware serial-number guide, which includes diagrams and menu paths that match the steps above.
Common Situations When You Need Your Peloton Model Number
Knowing where to find the model number on a peloton bike? helps you move quickly when you face paperwork or hardware questions. The same few situations come up again and again, and each one goes smoother when the model code is already saved in your notes or photos.
Peloton Bike Model Number Uses At A Glance
| Situation | Why The Model Number Matters | Extra Tip |
|---|---|---|
| Warranty claim or service ticket | Helps Peloton match your bike to the right parts list and procedures. | Keep a photo of the label in your phone so you can upload it with forms. |
| Recall or safety notice check | Recalls usually target a specific model code and build range. | Compare your model with the code listed in an official recall notice before you stop riding. |
| Ordering replacement parts | Seat posts, crank arms, and some covers differ between Bike and Bike+. | Match both model and serial so the part seller can confirm fit. |
| Buying or selling a used Peloton | Buyers often want proof that the bike is the version they expect. | Add a close-up photo of the label to your listing to build trust. |
| Insurance or equipment inventory | Model codes help insurers and gyms tell bikes apart on forms. | Store the code with your policy documents and serial number record. |
| Moving or shipping the bike | Some carriers ask for a model when quoting coverage or handling rules. | Share the model along with weight and dimensions when you request quotes. |
| Checking long-term warranty status | Peloton tools and staff often sort devices by model code first. | Use the serial to pull your device record, then confirm the model shown there matches your label. |
If you ever receive an email about a Peloton recall, match the model code in the message with the model on your label. The
CPSC Peloton Bike recall notice gives a clear example of this, listing a PL02 model code and the exact label location owners should check.
What To Do If You Still Cannot Find The Label
Sometimes stickers peel off, text fades, or a previous owner painted parts of the frame. If none of the frame checks or tablet menus reveal a model code, you still have a few paths you can try.
Check Your Order History And Email
Search your inbox for your original Peloton receipt or shipping notice. The order summary usually lists whether you bought the Bike or Bike+, and some documents list the model code beside the product name. If you purchased the bike secondhand, ask the seller to forward any digital receipts they still have.
If your bike is registered to your Peloton account, log in through the website and look for device or hardware history tools. These pages often show basic model and warranty details once you enter a serial number from a remaining label on the frame.
Use Serial Number Clues
Even when the model code is gone, serial formats can hint at factory and series. Peloton and partner service providers sometimes publish guidance that explains which serial prefixes match certain frame generations. Combine that with tablet menus, screen style, and other visual cues, and you can often narrow your bike to Bike or Bike+ even when the model code itself is missing.
When you talk with Peloton staff about parts, repairs, or recall checks, share clear photos of the entire bike, close-ups of the tablet, and any serial stickers that remain. This helps them match your hardware to the right group, even where the original model label is gone.
Final Checks Before You Ride Again
Once you have found the sticker and confirmed the model code, take two quick photos: one close shot of the label and one wide shot that shows where it sits on the frame. Save those images in a folder with your receipt and serial number so you never need to crawl around the mat again.
The next time someone asks where to find the model number on a peloton bike?, you will know exactly where to point: the front fork, the base of the frame, the tablet menu, and your own saved records. With the code in hand, every warranty claim, recall check, and parts order becomes a simple form instead of a guessing game.